Spodumene-bearing pegmatites confirmed at Jingellic Project
Released
Released
Announcement PDF
ASX Announcement
28 June 2024
Spodumene-bearing pegmatites
confirmed at Jingellic Project
Highlights
•
Kali Metals Limited (ASX: KM1) (“Kali Metals” or “the Company”) has received rock chip
assay results confirming lithium mineralisation from pegmatites located within the
Jingellic Project, part of the Company’s Lachlan Fold Belt portfolio of assets in New South
Wales (“NSW”)
•
X-Ray Diffraction (“XRD”) analysis of rock chip samples from the “Giant Pegmatite”
prospect confirm Spodumene as the dominant lithium-bearing mineral phase (up to 18
wt% coincident with assay results up to 1.54% Li2O)
•
A ~50km2 LiDAR survey completed over the Sweetwater Creek prospect area has
identified previously unknown pegmatite dykes
•
Rock chip samples from the newly identified “BFG Pegmatite” prospect contain elevated
lithium, fractionation trends and pathfinder elements consistent with lithium-caesiumtantalum (“LCT”) pegmatites
•
Encouraging historical rock chip sample assays reported for tin mine workings located
within the Sweetwater Creek Prospect. These results are subject to further investigation
and verification by the Company
•
A detailed grid soil geochemistry sampling program was recently completed across the
Sweetwater Creek prospect area
•
NSW government approvals received to conduct exploration activities within the
Woomargama and Mullengandra State Conservation Areas, both host prospective
pegmatite dyke occurrences
•
Results from the first reconnaissance drill program at the Spargoville Project, within the
Higginsville Lithium District are being collated and analysed, with an expected
announcement in July
Graeme Sloan, Managing Director commented:
“These early-stage results highlight the potential for the Jingellic Project area in NSW to host significant lithium
bearing mineralisation. Rock chip assays from the pegmatites tested so far show grades up to 1.54% Li2O and the
LIDAR survey has identified a number of previously unknown outcropping pegmatites that the Company will test
over time.
In addition to the lithium potential, our team has also sampled around historic tin mines in the Sweetwater Creek
prospect area, resulting in a number of highly encouraging rock chip sample assays.
A detailed soil geochemistry sampling program across the Sweetwater Creek prospect area has been completed
and work is underway to collate and analyse these results.
This is a great start for the Company and only possible due to the diligence of our Lachlan Fold Belt geology team.
Kali Metals is looking forward to the results from the next phase of field work.”
ASX : KM1
Kali Metals Limited Ground Floor, 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 1 of 19
Jingellic Lithium Project
LCT-Pegmatite Mineralisation
The Jingellic Project located in the Lachlan Fold Belt, NSW, is an ‘early mover’ play in an emerging LCT
pegmatite province consisting of the 100% owned EL9403 and EL9507, plus the LCT and tin-tungsten rights
to EL8958 (shaded blue in Figure 1). This tenement package covers approximately a total of 1,220 km2.
Figure 1. Location map of Kali Metals’ Jingellic and Tallangatta Projects
The initial exploration focus of the Company has been on the previously reported, highly prospective
Sweetwater Creek area (EL9403) which contains what is colloquially known as the “Giant Pegmatite” 1. The
Company recently collected four rock chip samples across a ~50m strike extent of the Giant Pegmatite with
assay results confirming enriched lithium mineralisation ranging from 0.66-1.54% Li2O (Figures 1 and 2;
Tables 1 and 2). In addition to strong fractionation trends, a correlation is evident between lithium and other
pathfinder elements which display elevated caesium, tantalum, tin and beryllium values (Table 2). This confirms
that the Giant Pegmatite is of LCT-type, and strongly supports the Company’s exploration model for this style
of deposit in this emerging region.
1
Refer KM1 ASX Announcement, 7 March 2024.
ASX : KM1
Kali Metals Limited Ground Floor, 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 2 of 19
XRD analysis of the rock chip samples from the Giant Pegmatite has confirmed that Spodumene is the
dominant lithium-bearing mineral phase in two out of the three samples with the other sample containing the
lithium-bearing mineral petalite (Table 3).
Table 1. Sweetwater Creek Prospect rock chip samples
Prospect
Sample ID
P794201
Easting (m)
524134
Northing (m)
6025237
Giant Pegmatite
Description
Giant Pegmatite
P794202
524140
6025235
Aplite
Aplite
Giant Pegmatite
P794203
524111
6025251
Aplite
Giant Pegmatite
P794204
524091
6025245
Aplite
BFG Pegmatite
JR0001
520823
6024963
Aplite
BFG Pegmatite
JR0002
520770
6024933
BFG Pegmatite
JR0003
520712
6025039
Aplite
Aplite
Table 2. Sweetwater Creek rock chip assays
Prospect
Sample ID
Li (ppm)
Li2O %
Be (ppm)
Cs (ppm)
Sn (ppm)
Ta (ppm)
K/Rb*
Giant Pegmatite
P794201
4583
0.99
130
339
1045
50
19
Giant Pegmatite
P794202
7146
1.54
152
256
1648
54
17
Giant Pegmatite
P794203
3057
0.66
139
135
1055
46
22
Giant Pegmatite
P794204
4635
1.0
138
185
569
45
20
BFG Pegmatite
JR0001
140
0.03
2
79
306
37
21
BFG Pegmatite
JR0002
201
0.04
2
105
202
26
23
BFG Pegmatite
JR0003
410
0.09
2
101
156
* K/Rb ratio calculated from whole rock sample analyses.
59
21
Table 3. Giant Pegmatite rock chip XRD analyses (major mineralogy wt %)
Sample
ID
Mica
Potassium
Feldspar
Sodium
Feldspar
Quartz
Spodumene
P794201
12
10
28
27
12
P794202
11
7
23
30
18
P794204
14
8
26
23
2
Petalite
14
Airborne LiDAR survey
During February 2024, Kali Metals completed an airborne LiDAR survey over the Sweetwater Creek prospect
and surrounding area (~50 km2) to assist with the identification of additional pegmatite bodies. The LiDAR
survey results have subsequently identified several previously unknown pegmatite dykes throughout the
project area. One such identified pegmatite dyke, referred to as the “BFG Pegmatite”, consists of two dykes
that combine into one over a combined~1 km strike extent (Figure 3). Rock chip assay results from the BFG
Pegmatite dykes highlight the highly-fractionated nature of the dykes, which in addition to elevated values of
tin, caesium, tantalum and lithium, confirm that the BFG Pegmatite displays LCT affinities (Table 2).
ASX : KM1
Kali Metals Limited Ground Floor, 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 3 of 19
Figure 2. Sweetwater Creek prospect surface geochemical program location map
ASX : KM1
Kali Metals Limited Ground Floor, 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 4 of 19
Figure 3. Sweetwater Creek prospect LiDAR enhanced hillshade image depicting newly identified pegmatite dykes at
the BFG prospect
Potential Tin-Tantalum Mineralisation
The Sweetwater Creek area contains several historic tin mines including the Mullengandra and McLurg’s tin
mines which were discovered in the early 1900s comprising numerous historical shafts and workings targeting
high-grade tin-bearing quartz veins and pegmatites (Figure 4). For example, the Mullengandra tin mine
workings include numerous shafts and small open cuts over ~180m strike extent. A historical data review has
recently been completed, revealing that these high-grade tin-bearing workings also contain elevated amounts
of tantalum, adding to the potential prospectivity of the area (Table 4).
Within the Company’s tenements at the nearby McLurg’s Gully tin mine, located ~1100m North West of the
Mullengandra tin mine, one historical quartz vein rock chip sample reported 11.4% Sn and 1060 ppm Ta
associated with coarse nuggety cassiterite mineralisation 2 (Table 4 and Figure 4). Importantly, both tin and
tantalum are on the US Critical Minerals List 3. Whilst these historical rock chip sample results are encouraging,
investors should not place undue reliance on the results until such time that Kali has independently validated
the results through further rock chip sampling.
2
2002, Brady, John, Annual Report On Exploration Undertaken On Exploration Licence 5907 (Sweetwater Creek) For The Period November
22, 2001 - November 21, 2002.
3
https://www.usgs.gov/news/national-news-release/us-geological-survey-releases-2022-list-critical-minerals.
ASX : KM1
Kali Metals Limited Ground Floor, 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 5 of 19
Figure 4. Location map of historical tin mines and rock chip sample assays, Sweetwater Prospect, Jingellic Project
ASX : KM1
Kali Metals Limited Ground Floor, 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 6 of 19
Table 4. Mullengandra Tin Mine rock chip results 4
Sample ID2
Northing
Easting
Sn (ppm) Nb (ppm)
Ta (ppm)
Prospect
Lithology
SC1
6025180
522040
2030
56
68
Hunter and Parsons
Aplite
SC2
6025180
522080
1450
55
68
Hunter and Parsons
Aplite
SC3
6024730
522790
17000
50
90
Mullengandra/Jupiter/Bright Star
Vein quartz
SC4
6024730
522790
20
<10
<10
Mullengandra/Jupiter/Bright Star
Vein quartz
SC5
6024730
522790
420
<10
<10
Mullengandra/Jupiter/Bright Star
Vein quartz
SC6
6024730
522790
25800
70
70
Mullengandra/Jupiter/Bright Star
Vein quartz
SC7
6024730
522790
1010
70
70
Mullengandra/Jupiter/Bright Star
Aplite
SC8
6024730
522790
1290
60
70
Mullengandra/Jupiter/Bright Star
Aplite
SC9
6024730
522790
1470
80
70
Mullengandra/Jupiter/Bright Star
Aplite
SC10
6025920
522530
1340
50
60
McLurg's Gully tin mine
Aplite
SC11
6025920
522530
4830
100
120
McLurg's Gully tin mine
Aplite
SC12
6025920
522530
11700
120
120
McLurg's Gully tin mine
Greisen
SC13
6025920
522530
1560
20
20
McLurg's Gully tin mine
Vein quartz
SC14
6025820
522650
690
30
30
McLurg's Gully tin mine
Aplite
SC15
6025820
522650
4900
110
130
McLurg's Gully tin mine
Aplite
SC16
6025820
522650
110400
1190
1060
McLurg's Gully tin mine
Pegmatite
SC17
6025820
522650
150
30
<10
McLurg's Gully tin mine
Greisen
SC18
6025820
522650
44000
440
410
McLurg's Gully tin mine
Pegmatite
SC19
6025760
522730
10700
120
130
McLurg's Gully tin mine
Pegmatite
SC20
6025760
522730
330
60
30
McLurg's Gully tin mine
Greisen
SC21
6025760
522730
100
20
<10
McLurg's Gully tin mine
Aplite
SC22
6024330
523270
11600
160
120
Jupiter tin mine
greisen/granite
SC23
6024330
523270
50
10
<10
Jupiter tin mine
Aplite
SC24
6024330
523270
11400
20
10
Jupiter tin mine
Vein quartz
SC25
6025120
522080
26500
290
250
Hunter and Parsons' mine
Greisen
SC26
6025120
522080
3930
80
70
Hunter and Parsons' mine
Greisen
SC27
6025680
525890
4450
50
70
McLurg's Gully tin mine
Greisen
SC28
6024730
522790
2820
60
70
Mullengandra/Jupiter/Bright Star
Granite
SC29
6023920
523280
4160
20
20
Jupiter tin mine
Vein quartz
SC30
6023750
522900
640
<10
<10
Jupiter tin mine
Vein quartz
SC31
6023640
522650
<10
<10
<10
Jupiter tin mine
Vein quartz breccia
SC32
6023620
522400
20
<10
<10
Jupiter tin mine
Vein quartz breccia
As part of a recent field reconnaissance program several rock chip samples were collected from several waste dumps
located at the Mullengandra and McLurg’s tin mine workings. The best assay result comes from rock chip sample JR0012,
4
2002, Brady, John, Annual Report On Exploration Undertaken On Exploration Licence 5907 (Sweetwater Creek) For The Period November
22, 2001 - November 21, 2002.
ASX : KM1
Kali Metals Limited Ground Floor, 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 7 of 19
collected from the McLurg’s Gully mine area which contained elevated tin (0.70% SnO2) within a pegmatitic host rock (see
Table 5 below).
Table 5. Mullengandra Tin Mine rock chip results
Prospect
Sample ID
Sn (ppm)
SnO2 %
Ta (ppm)
Li (ppm)
Li2O %
Cs (ppm)
Mullengandra tin mine
Mullengandra tin mine
Mullengandra tin mine
Mullengandra tin mine
McLurg's Gully tin mine
JR0007
JR0008
JR0009
JR0010
JR0012
229
136
1937
1848
5370
0.03
0.02
0.25
0.24
0.70
7
3
35
79
78
265
36
18
24
36
0.057
0.008
0.004
0.005
0.008
87
14
115
41
146
Soil Geochemistry Sampling Program
Kali Metals recently completed a soil geochemistry sampling program over the Sweetwater Creek prospect
(~600 samples; Figure 2). The soil samples were collected over a 13.7km2 area on a 150 x 150m grid spacing
pattern with all sample assays now received from the laboratory.
Compilation, QAQC analysis and
interpretation is currently in progress.
NSW Government Approvals
Kali Metals was recently granted access to carry out low impact exploration activities within the Mullengandra
and Woomargama State Conservation Areas which are highly prospective for both LCT-bearing pegmatites
and tin-tantalum mineralisation (EL9403 and EL9507). Access to these prospective areas allows the
Company to plan and implement further soil geochemistry sampling programs as part of its overall exploration
strategy.
Higginsville Drill Program
The Company has completed its initial wide spaced Reverse Circulation (RC) drilling program focused on the
Spargoville and Widgiemooltha Projects, within the Company’s portfolio of assets at the Higginsville Lithium
District. 5
The Company is currently analysing the results of the drill program and expects to announce the results to the
market shortly.
5
Refer KM1 ASX Announcement, 24 April 2024.
ASX : KM1
Kali Metals Limited Ground Floor, 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 8 of 19
Authorised for release by the Board of Kali Metals Limited.
For further information please contact:
Graeme Sloan
Managing Director
T +61 (0) 86242 8880
Andrew Willis
Investor & Media Relations
T +61 (0) 458 441 414
About Kali Metals Limited
Kali Metals’ (ASX: KM1) portfolio of assets represents one of the largest and most prospective exploration
packages across Australia’s world leading hard-rock lithium fields. Kali Metals’ `3,854km2 exploration tenure
is located near existing, emerging, and unexplored lithium and critical minerals regions in WA including the
Pilbara and Eastern Yilgarn and the Lachlan Fold Belt in NSW and Victoria.
Kali Metals has a team of well credentialed professionals who are focused on exploring and developing
commercial lithium resources from its highly prospective tenements and identifying new strategic assets to
add to the portfolio. Lithium is a critical component in the production of electric vehicles and renewable energy
storage systems. With the rapid growth of these industries, the demand for lithium is expected to increase
significantly in the coming years. Kali Metals is committed to playing a key role in meeting this demand and
powering the global clean energy transition.
Forward-Looking Statements
This document may include forward-looking statements. Forward-looking statements include, but are not
limited to, statements concerning Kali Metals’ planned exploration program, future events and other
statements that are not historical facts. When used in this document, the words such as "could," "plan,"
"estimate," "expect," "intend," "may”, "potential", "should," and similar expressions are forward-looking
statements. Although Kali Metals believes that its expectations reflected in these forward-looking statements
are reasonable, such statements involve risks and uncertainties including matters beyond the control of Kali
Metals and no assurance can be given that actual results or events will be consistent with these forwardlooking statements.
Competent Person Statement
Exploration Results
The information in this announcement that relates to Exploration Results for Kali Metals, complies with the
2012 Edition of the Australasian Code for Reporting of Exploration Results and is based on, and fairly
represents, information and supporting documentation prepared by Dr Luke Mortimer, a Technical Advisor to
Kali Metals Limited. Dr Mortimer is a member of the AIG and has sufficient experience that is relevant to the
style of mineralisation and type of deposit under consideration and to the activity being undertaken to qualify
as a Competent Person as defined in the 2012 Edition of the JORC Code. Dr Mortimer considers that the
information in the market announcement is an accurate representation of the available data and studies for
the mining project. Dr Mortimer consents to the inclusion in this announcement of the matters based on his
information in the form and context in which it appears.
Previously Reported Results
Kali confirms that it is not aware of any new information or data that materially affects the information included
in its previous announcements and, that all material assumptions and technical parameters underpinning the
estimates in its previous announcements continue to apply and have not materially changed. Kali Metals
confirms that the form and context in which the Competent Persons’ findings are presented have not been
materially modified from the original announcement.
ASX : KM1
Kali Metals Limited Ground Floor, 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 9 of 19
JORC Code, 2012 Edition – Table 1
Section 1: Sampling Techniques and Data
Criteria
Sampling
techniques
ASX : KM1
JORC
Code Commentary
Explanation
Nature
and
quality
of
sampling (e.g. cut
channels, random
chips, or specific
specialised
industry standard
measurement
tools appropriate
to the minerals
under
investigation,
such as down hole
gamma sondes,
or handheld XRF
instruments, etc).
These examples
should not be
taken as limiting
the
broad
meaning
of
sampling.
Include reference
to
measures
taken to ensure
sample
representivity
and
the
appropriate
calibration of any
measurement
tools or systems
used.
Aspects of the
determination of
mineralisation
that are Material
to the Public
Report.
In cases where
‘industry
standard’ work
has been done
this would be
relatively simple
(e.g.
‘reverse
circulation drilling
was used to
obtain
1
m
samples
from
which 3 kg was
pulverised
to
produce a 30 g
charge for fire
assay’). In other
cases,
more
explanation may
be required, such
as where there is
coarse gold that
Surface Samples
Rocks
Samples reported in this release are surface rock chips collected from various pegmatite bodies across
the project area and are representative of the outcrop they were collected from, given the nature of
pegmatites having variable grain size and mineralogy.
The rock samples collected were between 0.5kg and 3kg in weight. All samples collected by Kali were
submitted to Intertek Minerals in Adelaide for four-acid digestion by inductively coupled plasma mass
spectrometry (ICPMS) and inductively coupled plasma optical spectrometry (ICPOES).
The quantitative XRD laboratory analysis and identification of spodumene in rock chip samples (Sample
ID. P794201, P794202 and P794204) collected from the Giant Pegmatite outcrop located at the Jingellic
Lithium Project was conducted by Intertek Minerals, Perth WA. These rock chip samples collected were
between ~1-2 kg in weight.
Historical rock chip sample assays reported in Table 4 and Figure 4 were sourced from:
2002, Brady, John, Annual Report On Exploration Undertaken On Exploration Licence 5907 (Sweetwater
Creek) For The Period November 22, 2001 - November 21, 2002
The original sampling and assay protocols for these historical results is not known. Their accuracy should
be confirmed by Kali through further independent sampling.
Soils
~100g soil samples submitted for analysis were taken from a depth of ~25cms and placed into paper
geochemical sample bags. Sampling protocols, and quality assurance and quality control were as per
industry best practice procedures. All samples were submitted to Intertek Minerals in Adelaide for fouracid digestion by inductively coupled plasma mass spectrometry (ICPMS) and inductively coupled
plasma optical spectrometry (ICPOES).
Drill Samples
No drill samples are reported in this announcement.
Kali Metals Limited Ground Floor, 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 10 of 19
Drilling
Techniques
Drill Sample
Recovery
Logging
ASX : KM1
has
inherent
sampling
problems.
Unusual
commodities or
mineralisation
types
(e.g.
submarine
nodules)
may
warrant
disclosure
of
detailed
information.
Drill type (e.g.
core,
reverse
circulation, openhole
hammer,
rotary air blast,
auger, Bangka,
sonic, etc) and
details (e.g. core
diameter, triple or
standard
tube,
depth of diamond
tails,
facesampling bit, or
other
type,
whether core is
oriented and if so,
by what method,
etc).
Method
of
recording
and
assessing
core
and chip sample
recoveries
and
results assessed.
Measures taken
to
maximise
sample recovery
and
ensure
representative
nature of the
samples.
Whether
a
relationship exists
between sample
recovery
and
grade
and
whether sample
bias may have
occurred due to
preferential
loss/gain
of
fine/coarse
material.
Whether core and
chip
samples
have
been
geologically and
geotechnically
logged to a level
of
detail
to
support
appropriate
Mineral Resource
No drill samples are reported in this announcement.
No drill samples are reported in this announcement.
Other samples reported in this release are individual rock chips and recovery is not relevant.
Rock chips were collected as part of a detailed surface geological mapping program. Qualitative field
logging of the rocks is completed in the field including assessment of weathering, lithology, alteration,
veining, mineralisation, and mineralogy.
Kali Metals Limited Ground Floor, 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 11 of 19
Subsampling
techniques
and sample
preparation
Quality of
assay data
and
laboratory
tests
ASX : KM1
estimation,
mining
studies
and metallurgical
studies.
Whether logging
is qualitative or
quantitative
in
nature. Core (or
costean, channel,
etc) photography.
The total length
and percentage
of the relevant
intersections
logged.
If core, whether
cut or sawn and
whether quarter,
half or all core
taken.
If
non-core,
whether riffled,
tube
sampled,
rotary split, etc
and
whether
sampled wet or
dry.
For all sample
types, the nature,
quality
and
appropriateness
of the sample
preparation
technique.
Quality control
procedures
adopted for all
sub-sampling
stages
to
maximise
representivity of
samples.
Measures taken
to ensure that the
sampling
is
representative of
the
in-situ
material
collected,
including
for
instance results
for
field
duplicate/secondhalf sampling.
Whether sample
sizes
are
appropriate
to
the grain size of
the
material
being sampled
The
nature,
quality
and
appropriateness
of the assaying
and laboratory
procedures used
Surface Samples
Rocks
No field sub-sampling techniques were employed.
Sample preparation following standard industry practice was undertaken at Intertek, Adelaide and
Perth laboratories, where the samples received were sorted and dried.
All rock chips were initially crushed and then pulverize using a vibrating disc pulveriser to produce a
homogenous, representative sample. Samples were then weighed and sent for their respective analysis.
Internal screen QAQC is done at 90% passing 75um.
Rock chips were collected from outcropping pegmatite bodies. Field geologists selected samples that
best represented the geology of the pegmatite body.
Rocks collected were assessed for their representativeness with grainsize of each pegmatite taken in
account to ensure the sample size was appropriate.
The rock chip samples subjected to XRD analysis were grab samples which were dried at 50 degrees
Celsius before being milled to <60 microns and presented as unoriented powder mounts for
quantitative analysis, crystalline and amorphous content.
Historical rock chip sample assays in Table 4 and Figure 4 were sourced from:
2002, Brady, John, Annual Report On Exploration Undertaken On Exploration Licence 5907 (Sweetwater
Creek) For The Period November 22, 2001 - November 21, 2002
The original sampling and assay protocols for these historical results is not known. Their accuracy should
be confirmed by Kali through further independent sampling.
Soils
Soil samples were sampled via a shovel and then sieved to collect a 100g sample at -177µm size fraction
for analysis.
Sample preparation following standard industry practice was undertaken at Intertek-Adelaide and ,
Perth laboratories where the samples received were sorted and dried. Samples were dried, with coarse
crushing to ~10 millimetres, followed by pulverisation of the entire sample in an LM5 or equivalent
pulverising mill to a grind size of 85%, passing 75 micron.
The sample sizes are considered adequate for the material being sampled.
The sample preparation followed industry best practice for LCT-pegmatite exploration.
Surface Samples
All rock samples were analysed by the following methods:
Mixed acid digest & peroxide fusion with ICPMS & ICPOES for 55 elements.
All soil samples were analysed by the following methods:
Kali Metals Limited Ground Floor, 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 12 of 19
Verification
of sampling
and
assaying
Location of
data points
ASX : KM1
and whether the
technique
is
considered partial
or total.
For geophysical
tools,
spectrometers,
handheld
XRF
instruments, etc,
the parameters
used
in
determining the
analysis including
instrument make
and
model,
reading
times,
calibrations
factors applied
and
their
derivation, etc.
Nature of quality
control
procedures
adopted
(e.g.
standards,
blanks,
duplicates,
external
laboratory
checks)
and
whether
acceptable levels
of accuracy (i.e.
lack of bias) and
precision
have
been established.
The verification of
significant
intersections by
either
independent or
alternative
company
personnel.
The
use
of
twinned holes.
Documentation
of primary data,
data
entry
procedures, data
verification, data
storage (physical
and electronic)
protocols.
Discuss
any
adjustment
to
assay data
Accuracy
and
quality of surveys
used to locate
drill holes (collar
and
downhole
surveys),
trenches,
mine
workings
and
other locations
Multi-element 4-Acid Digest with ICPMS & ICPOES for 48 elements in addition to fire assay-ICPMS for
gold.
Drill samples
No Drill Samples were reported in this announcement.
These techniques are considered a total digest for all relevant minerals.
Intertek Minerals internal QAQC process was used for assaying of duplicate, blank and standard
reference material.
QAQC was entered at the following rates: duplicates 3:100 and standards 3:100
This is considered sufficient for first pass geochemical sampling such as soils.
The quantitative XRD analyses have a detection limit of approximately 0.5 weight % on crystalline
phases and cannot identify amorphous (non-crystalline) material. Intertek used a single internal
standard ZnO (zincite).
Conversion of Li ppm to Li2O % used calculated Li % multiplied by a conversion rate of 2.153.
Conversion of Sn ppm to SnO2 % used calculated Sn % multiplied by a conversion rate of 1.296.
Primary data was collected by employees of the Company at the Project site. All measurements and
observations were recorded digitally and entered into the Company’s database. Data verification and
validation is checked upon entry into the database.
No adjustments or calibrations have been made to any assay data.
Sample locations are determined by handheld GPS with and accuracy of approximately 5m.
The grid system used is GDA 1994 - MGA zone 55.
Kali Metals Limited Ground Floor, 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 13 of 19
Data
spacing and
distribution
Orientation
of data in
relation to
geological
structure
Sample
security
used in Mineral
Resource
estimation.
Specification of
the grid system
used.
Quality
and
adequacy
of
topographic
control.
Data spacing for
reporting
of
Exploration
Results.
Whether the data
spacing,
and
distribution
is
sufficient
to
establish
the
degree
of
geological
and
grade continuity
appropriate for
the
Mineral
Resource and Ore
Reserve
estimation
procedure(s) and
classifications
applied.
Whether sample
compositing has
been applied
Whether
the
orientation
of
sampling
achieves
unbiased
sampling
of
possible
structures and the
extent to which
this is known,
considering the
deposit type.
If the relationship
between
the
drilling
orientation and
the orientation of
key mineralised
structures
is
considered
to
have introduced a
sampling
bias,
this should be
assessed
and
reported
if
material.
The
measures
taken to ensure
sample security
Sample spacing for rock chip sampling has been determined solely by geological mapping and no grade
continuity is implied.
Soil sampling was conducted on a 150 x 150m spacing at Sweetwater Creek. This is considered
appropriate for first pass reconnaissance exploration.
No sample compositing has been applied.
No Mineral Resources have been estimated.
Soil Sampling was designed on a 150m x 150m spaced grid (i.e. unidirectional) and to cross known
structures interpreted to be associated with known L
Share your feedback
Discover