Gold Anomaly increases 80% to Over 9km at Marble Bar
Released
Released
Announcement PDF
ASX Announcement
21 January 2025
Gold Anomaly increases 80% to >9km at Marble Bar
Highlights
•
Kali Metals Limited (ASX: KM1) (“Kali” or “the Company”) is pleased to announce further results from its
100%-owned Marble Bar Gold-Lithium Project in Western Australia (Refer Figure 1)1
•
Kali has increased the recently identified (December 2024)2 gold-in-soil anomaly trend by 80% from 5.1
km to a 9.5 km cumulative, coherent strike length by assaying 619 historical soil samples not previously
tested for gold
•
Currently, less than 1 km of gold-in-soil trend has been mapped in the field. Reconnaissance to date has
identified two Prospects (Tiger and Sherman) 3 with gold-bearing quartz veins on surface measuring up to
7m in width, 120m in length and up to 4.0g/t gold at surface4
•
At the Panther Lithium Prospect, two channels (31m and 9m length), cut across the main pegmatite
outcrop, returned results with average grades of 0.14% Li2O and 0.48% Li2O, respectively
Paul Adams, Managing Director of Kali Metals commented:
“We are extremely pleased with the gold soil sample assay results. The cumulative length of the
anomaly is exciting at 9.5 km, and so far, we have mapped only 10% of that length in the field. The trend
of the main soil anomaly matches the orientation of discovered quartz veins already recorded at both
the Tiger and Sherman Prospects, giving us confidence in the soil results. Now that the Christmas break
is behind us, we are scheduled to recommence the field work and continue ground-truthing the entire
soil anomaly during Q1 2025. This is expected to identify and define potential drill targets.
In light of these promising results, Kali is shifting its primary focus at Marble Bar to gold exploration,
with lithium remaining an important but secondary focus.”
The Pilbara
On 7 October 2024, Kali announced the renegotiated terms of its JV with SQM Australia, including increasing
SQM Australia’s total spend to $4.25M by 15 December 2026 in order for SQM Australia to earn a 50% interest
in Kali’s DOM’s Hill and Pear Creek Projects5. As part of the change in terms, Kali retained 100% ownership of
the Marble Bar Project.
Kali’s Marble Bar Project is located in the eastern region of the Pilbara, approximately 30km east of the town
of Marble Bar and its historic gold mining centre (Refer Figure 1). Covering 42km 2, the project geology
comprises the Mount Edgar Granitic Complex and Warrawoona Greenstone Belt (sedimentary and volcanic
rocks).
1
Refer Annexure A.
Refer KM1 ASX announcement dated 11 December 2024.
3
Refer KM1 ASX announcement dated 15 October 2024.
4
Refer KM1 ASX announcement dated 11 December 2024.
5
Refer KM ASX announcement dated 7 October 2024.
2
ASX : KM1
Kali Metals Limited 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 1 of 16
Figure 1. Kali’s Pilbara tenure
Marble Bar – Gold Anomaly Discovered
In September 2024, reconnaissance and sampling over the Marble Bar Project area targeted both LCT
pegmatites and quartz veining for gold potential. Initial areas of gold focus included the Tiger and Sherman
Prospects (Refer Figure 2), with the primary focus on Tiger where rock-chip results recorded values up to 2.95
g/t gold6. A single, isolated rock-chip sample from the Sherman Prospect recorded a value of 1.71 g/t gold.7
In November 2024, the Sherman Prospect was revisited. Through mapping, a sizeable gold-bearing quartz
vein 7m wide and 120m long (its further strike length being obscured by scree and soil) was discovered,
retuning several rock chip samples of >1 g/t gold with a peak value of 4.0 g/t gold.8
In December 2024, multi-element geochemistry results from a historical soil sampling program, conducted in
late 2021 by Kalamazoo Resources Limited (ASX:KZR) pursuant to the SQM Australia JV, were compiled. As a
result, Kali delineated a cumulative, coherent 5.1km long WNW striking gold-in-soil anomaly, bisected by
several off-setting north-east striking structures inferred from the regional magnetic (RTP1VD) imagery.
The mineralised structures at both the Sherman and Tiger Prospects are characterised by dominant NWWNW trending quartz veins, in a similar orientation to the gold-in-soil anomalies (Refer Figures 2 and Figure
3).
6 Refer KM1 ASX announcement dated 15 October 2024.
7
8
Refer KM1 ASX announcement dated 15 October 2024.
Refer KM1 ASX announcement dated 11 December 2024.
ASX : KM1
Kali Metals Limited 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 2 of 16
The gold-bearing quartz veins are hosted in syenitic granites within the larger Mt Edgar granitoid dome.
Assaying of Historical Soil Samples
In December 2024, Kali submitted 619 historical soil samples (not previously assayed for gold) to the ALS
laboratory at Wangara, being the same laboratory that previously assayed the soil samples for lithium
geochemistry.
The sample preparation method included dry screening to 75 micron and split using riffle splitter. The analysis
consisted of fire assay fusion and Au-ICP21 (Refer JORC Table 1 for details).
The assay results support the Company’s previous interpretation of gold-in-soil anomalism. The previous
anomaly areas were extended along strike and new additional anomalous zones are identified. The cumulative
strike length of coherent gold-in-soil anomalies has increased from the previous 5.1km to 9.5km (this includes
a 2.2km weaker anomaly zone in the SW part of the Project area), representing an >80% increase in cumulative
strike length. The shapes of the anomalies appear offset along the trends that coincide with magnetic-low
features inferred from regional magnetic (RTP1VD) imagery, likely representing the geological faults that have
segmented the underlaying geology into major blocks. Occasionally, gold anomalism occurs along these
offsetting mag-low features.
Figure 2. Marble Bar Project (SW area) gold-in-soil results
ASX : KM1
Kali Metals Limited 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 3 of 16
Figure 3. Marble Bar Project (NE area) gold-in-soil results
Marble Bar – Lithium Exploration
The pegmatites at the Panther Prospect are NW-striking, hosted in gneissic granite. The pegmatites sit flatly
over the top of granitic outcrops and toward east the dip increases from gentle to steep. The sampled
pegmatite true thickness is estimated at approximately 10m.
Previous reconnaissance at this locality returned outcrop rock-chip samples between 0.35% Li2O and 1.8%
Li2O9. Two channels with lengths 31m and 9m were located ~50m apart along the strike. The channels were
cut (with a battery-powered rock saw) 6-7cm wide and 3-4cm deep, to simulate HQ half-core rock volume.
Every sample length was photographed before and after cutting, geologically logged and rock recovery was
recorded. The start, end and inflection points in trajectory were picked up with DGPS. Sample length was
nominally 1m, honouring the geological boundaries where required. Channels were sampled continuously, with
10% control samples (duplicates, standards and blank samples). Samples were submitted to ALS Wangara,
Perth for sample preparation (crushing and pulverising) and analysed with combination of methods sodium
peroxide fusion, ME-ICP89 (ICP-AES) and ME-MS91 (ICP-MS).
The channel sampling results from the north-west part of Panther Prospect from the two trenches returned
31m @ 0.14% Li2O and 9m @ 0.48 Li2O (Refer Figure 5). Further lithium exploration at towards the south-east
part of the prospect and at depth to west where the thicker pegmatite bodies could occur would be warranted
at a future date.
9 Refer KM1 ASX announcements dated 4 January 2024 and 15 October 2024.
ASX : KM1
Kali Metals Limited 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 4 of 16
Figure 4. Panther Lithium Prospect geology plan map and rock-chip-sampling results
Figure 5. Trenching in the northern part of Panther Lithium Prospect
ASX : KM1
Kali Metals Limited 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 5 of 16
Authorised for release by the Board of Kali Metals Limited.
For further information please contact:
Paul Adams
Managing Director
E admin@kalimetals.com.au
Andrew Willis
Investor & Media Relations
E awillis@nwrcommunications.com.au
About Kali Metals Limited
Kali Metals’ (ASX: KM1) portfolio of assets represents one of the largest and most prospective exploration
packages across Australia’s world leading hard-rock lithium fields. Kali’s 3,960km2 exploration tenure is
located near existing, emerging, and unexplored lithium and critical minerals regions in WA including the
Pilbara and Eastern Yilgarn and the Southern Lachlan Fold Belt in NSW and Victoria.
Kali Metals has a team of well credentialed professionals who are focused on exploring and developing
commercial lithium resources and identifying new strategic assets to add to the portfolio. In addition to lithium,
Kali Metals has a number of prospective gold and tin projects within its existing tenure and is committed to
generate shareholder value through exploration and development of these assets.
Forward Statements
This document may include forward-looking statements. Forward-looking statements include, but are not
limited to, statements concerning Kali’s planned exploration program and other statements that are not
historical facts. When used in this document, the words such as "could," "plan," "estimate," "expect," "intend,"
"may”, "potential", "should," and similar expressions are forward-looking statements. Although Kali believes
that its expectations reflected in these forward-looking statements are reasonable, such statements involve
risks and uncertainties and no assurance can be given that actual results will be consistent with these forwardlooking statements.
Previously Reported Results / Competent Persons Statement
The information in this report that relates to Data and Exploration Results is based on and fairly represents
information and supporting documentation compiled and reviewed by Mr Mladen Stevanovic a Competent
Person who is a Member of the AusIMM (membership number 333579) and Exploration Manager at Kali
Metals. Mr Stevanovic has sufficient experience relevant to the style of mineralisation and type of deposit
under consideration and to the activity which he has undertaken to qualify as a Competent Person as defined
in the 2012 Edition of the ‘Australasian Code for the Reporting of Exploration Results, Mineral Resources and
Ore Reserves’. Mr Stevanovic consents to the inclusion in the report of the matters based on his information
in the form and context in which it appears.
The information in this announcement that relates to previously reported Exploration Results was previously
announced in Kali’s announcements dated 4 January 2024, 7 October 2024, 15 October 2024 and 11
December 2024. Kali confirms that it is not aware of any new information or data that materially affects the
information included in the original announcements.
ASX : KM1
Kali Metals Limited 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 6 of 16
Annexure A – Tenements
Marble Bar Project (WA):
E45/4700
E45/5970
Annexure B – Channel Sampling
Table: Channel sampling details
Channel_ID
Max_Depth
NAT_Grid
NAT_East
NAT_North
RL
Azimuth*
Dip*
MBCH001
31
MGA94_50
803383.21
7652822.64
226.46
100
-14
MBCH002
8
MGA94_50
803427.09
7652781.55
217.97
64
+2
Note * general for entire length of trench
ASX : KM1
Kali Metals Limited 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 7 of 16
Appendix 2: JORC Code, 2012 Edition – Table 1
Section 1: Sampling Techniques and Data (Criteria in this section apply to all succeeding sections.)
Criteria
JORC Code explanation
Commentary
Sampling techniques
·
2024 rock chip samples referred to in this report were
Nature and quality of sampling (eg cut
channels, random chips, or specific
obtained from random insitu rock chip samples of
specialised industry standard measurement
quartz veins in E45/4700 as observed by Kali
tools appropriate to the minerals under
geologists during standard field reconnaissance
investigation, such as down hole gamma
campaign. The random rock chip samples are
sondes, or handheld XRF instruments, etc).
irregularly spaced which is considered appropriate for
These examples should not be taken as
“regional scale” reconnaissance-level lithium and gold
limiting the broad meaning of sampling.
exploration. This sampling practice is appropriate to
the generally sub-cropping to outcropping profile of
the area sampled and complies with industry best
practice.
2024 channel samples referred to in this report were
obtained from outcrop pegmatite body in E45/5970.
Two channels were cut (39m and 9m long) at 50m
spacing between channels. The channel samples
were treated like HQ drillcore in terms of volume of
rock in sample, geological logging and QAQC. The
practice is considered appropriate as a step between
the surface (rock-chip, soil, stream etc.) sampling and
drilling. It complies with industry best practice.
2021 soil samples referred to in this report were
obtained from in situ soil samples. Soil sampling was
conducted along 200m spaced E-W lines with a
sample station every 100m i.e. a 200m x 100m grid
pattern. The soil sampling interval is considered
sufficient for reconnaissance-level lithium and gold
exploration. Soil samples were sieved in the field to 2mm size fraction. Soil sampling practice is
appropriate to the generally residual soil profile of the
area sampled and complies with industry best
practice. For additional details on reported soil
sampling refer to KZR announcement dated 28
February 2022.
2025 assay of historical soil samples has copied the
2021 sample submission workflow. It used the same
laboratory, preparation method and analytical method
as it was done by Kalamazoo in 2021.
·
Include reference to measures taken to
Rock-chip samples are “point” samples (unlike
ensure sample representativity and the
channel or drilling samples) and thus should not be
appropriate calibration of any measurement
considered representative of overall/average grade.
tools or systems used.
Soil samples are “point” samples (unlike channel or
drilling samples) and thus should not be considered
representative of overall/average grade. By
assessing the relative relation between the
ASX : KM1
Kali Metals Limited 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 8 of 16
background and the anomalous values, it can provide
the indication for mineralisation potential over a
certain area.
Channel samples are “continuous” samples (like
drilling samples) and thus should be considered
representative in terms of overall/average grade at
sampling locality. Channel samples provide good
indication of what is expected to be encountered at
depth by drilling.
·
Aspects of the determination of
Gold mineralisation in outcrop was not visible;
mineralisation that are Material to the Public
however, rock-chip sampling was guided by visual
Report.
indications of mineralisation (quartz veins, signs of
late foliation and shearing features, presence of
vughs and cubic pits with iron oxide staining likely
after sulphides etc.).
Gold mineralisation in soil was not visible. The
sampling was completed systematically in 200x100m
pattern.
Lithium mineralisation was visually identified by
colour, shape and weathering typical for spodumene
and lepidolite, supported by the previously completed
mineralogical assessment and identification of lithium
minerals at this locality (as per published in
Company’s Prospectus announced on 04/01/2024).
·
In cases where ‘industry standard’ work
·
2024 rocks: Some 2kg of sampled material per
has been done this would be relatively simple
sample from outcrops taken with geopick. The rock
(eg ‘reverse circulation drilling was used to
material is collected in dry conditions and placed in
obtain 1 m samples from which 3 kg was
calico bags. Samples were submitted (without sub-
pulverised to produce a 30 g charge for fire
sampling) for sample preparation and analysis to ALS
assay’). In other cases more explanation may
laboratories in Perth, WA. Sample preparation at the
be required, such as where there is coarse
lab included sample sorting, drying, crushing and
gold that has inherent sampling problems.
milling.
Unusual commodities or mineralisation types
(eg submarine nodules) may warrant
disclosure of detailed information.
·
2024 channels: Some 3-5kg of sampled material
per sample from outcrops cut using rock saw and
taken with chisel. The rock material is collected in dry
conditions and placed in calico bags. Samples were
submitted (without sub-sampling) for sample
preparation and analysis to ALS laboratories in Perth,
WA. Sample preparation at the lab included sample
sorting, drying, crushing and milling. The QAQC was
the same as for the drilling.
·
2021 soils (and 2025 assay): Soil samples were
collected in dry conditions and placed in numbered
calico bags and grouped in polyweave bags for
dispatch to the laboratory. Sample size was generally
0.3-0.5 kg. Samples were directly delivered to the
Kalamazoo Perth office and subsequently Portable
Spectral Services via tracked TOLL freight
consignment. Field duplicate samples were collected
at a rate of 1:50. Duplicate results show an
ASX : KM1
Kali Metals Limited 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 9 of 16
acceptable level of variability for the material sampled
and style of mineralisation. Sample weights are
recorded and provided by the laboratory. For
additional details on reported soil sampling refer to
KZR announcement dated 28 February 2022.
Drilling techniques
·
Drill type (eg core, reverse circulation,
Channels were cut using a handheld battery-powered
open-hole hammer, rotary air blast, auger,
rock saw and sampled with chisel and hammer. The
Bangka, sonic, etc) and details (eg core
cut channel was consistently 6-7cm wide and 3-4cm
diameter, triple or standard tube, depth of
deep, to replicate HQ half-core volume of rock
diamond tails, face-sampling bit or other type,
sample.
whether core is oriented and if so, by what
method, etc).
Drill sample recovery
·
Method of recording and assessing core
Channels were logged for material recovered. Any
and chip sample recoveries and results
fissures in outcrop or soil patches along the sampling
assessed.
trajectory were recorded as a “loss” in percentages.
·
Measures taken to maximise sample
The soil patches along the sampling trajectory were
recovery and ensure representative nature of
attempted to be cleaned to bedrock ahead of cutting.
the samples.
Where unsuccessful (e.g. thick soil pockets filling the
fissure in outcrop), these intervals were recorded a
recovery loss.
·
Whether a relationship exists between
The depth and width of channel samples was
sample recovery and grade and whether
consistent, so no bias can occur between recovery
sample bias may have occurred due to
and grade.
preferential loss/gain of fine/coarse material.
Logging
·
Whether core and chip samples have
Geological logging was completed by qualified
been geologically and geotechnically logged to
geologist. Information collected for each sample
a level of detail to support appropriate Mineral
would include type of lithology, alteration,
Resource estimation, mining studies and
mineralisation and structural measurements (and
metallurgical studies.
recovery for channel sampling). As opposed to rockchip or soil sampling, channel sampling may be used
to support Mineral Resource estimate or mining and
metallurgical studies, as being representative of
interval sampled.
·
Whether logging is qualitative or
Qualitative logging has been completed in the field.
quantitative in nature. Core (or costean,
After logging (described above), the sampled material
channel, etc) photography.
would be placed onto labelled calico bag,
photographed (for rock-chip samples: with visible
hand-held GPS on photo; for channel samples
additional photos of the channel trajectory before and
after cutting were taken), then placed into the bag.
The sampling locations and information was
transferred from portable GIS device (e.g. tablet) or
typed from field notebook to Excel spreadsheet at the
end of each day and locations validated in GIS.
Photos of samples and photos of notes/sketches from
notebooks were copied over onto the Company’s
server.
·
The total length and percentage of the
·
All samples were geologically logged.
relevant intersections logged.
ASX : KM1
Kali Metals Limited 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 10 of 16
Sub-sampling
·
techniques and sample
quarter, half or all core taken.
If core, whether cut or sawn and whether
preparation
Channels were cut using a handheld battery-powered
rock saw and sampled with chisel and hammer. The
cut channel was consistently 6-7cm wide and 3-4cm
deep, to replicate HQ half-core volume of rock
sample.
·
If non-core, whether riffled, tube sampled,
rotary split, etc and whether sampled wet or
Soil samples were sieved in the field to -2mm
fraction.
dry.
·
For all sample types, the nature, quality
The sample preparation in the lab included: dry,
and appropriateness of the sample preparation
crush & fine crush to -2mm, pulverise to -75um
technique.
(85%).
·
The only control of soil sampling sieving fraction is
Quality control procedures adopted for all
sub-sampling stages to maximise
the sieve used for sieving; this can be considered a
representivity of samples.
good check. Aside from soils, no other samples were
prepared in the field before sampling.
·
Measures taken to ensure that the
Field duplicates are collected in the field (however,
sampling is representative of the in situ
this is not a measure representativity in case of
material collected, including for instance
nuggetty mineralisation), as well the lab duplicates
results for field duplicate/second-half sampling.
were requested. Other control samples were
standards and blanks. Rock-chip and soil samples
can indicate it, but only channel and drilling samples
can be used to assess the spatial variability of
mineralisation.
·
Whether sample sizes are appropriate to
the grain size of the material being sampled.
Rock chip samples contain 2kg of chipped in-situ
outcrop , with individual chips sizes usually varying
from 1cm to 10cm.
Channel samples contain 3-5kg of cut & chiselled insitu outcrop pieces, with individual pieces usually
varying from 1cm to 20cm in size.
Soil samples contain 0.3-0.5kg of -2mm sieved
material from surface soil B horizon.
Quality of assay data
·
The nature, quality and appropriateness
and laboratory tests
of the assaying and laboratory procedures
(independent and internationally accredited
used and whether the technique is considered
laboratory). Samples were analysed with method Au-
partial or total.
ICP22 on gold. Previous multi-element sampling in
2024 rock chip samples were submitted to ALS Perth
these areas did not identify elevated levels of other
commodity that would be potentially of economic
interest (or deleterious otherwise). However, multielement analysis will be carried out again once these
gold prospects progress to drilling stage. Sampling
and assaying quality control procedures consisted of
the laboratory inclusion of Certified Reference
Materials (CRMs), coarse blanks and sample
duplicates. Assays of quality control samples were
compared with reference samples for gold and
verified as acceptable prior to use of data from
analysed batches. The analytical techniques and
quality control protocols used are considered
appropriate for the data to be used for reporting
ASX : KM1
Kali Metals Limited 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 11 of 16
exploration rock chip mineralogy results.
2021 soil samples were analysed with a p-XRF unit
and conducted by Portable Spectral Services Pty Ltd
in Perth WA. The p-XRF analysis used was a
specialised “Li Index” function developed by Portable
Spectral Services Pty Ltd. Based on “Li index”, a subselection of samples was then made to be sent to
ALS Perth for muti-element analysis (including lithium
and gold). The assaying techniques and quality
control protocols used are considered appropriate for
the data to be used for reporting exploration soil
geochemistry results. For additional details on
reported soil sampling refer to KZR announcement
dated 28 February 2022.
2024 soil re-assay samples were submitted to ALS
Wangara, Perth. The sample preparation method
included SCR-41f (dry screening to 75 micron; 200
mesh) and SPL-21 (split sample using riffle splitter).
The analysis consisted of FA-FUSPG1 (fire assay
fusion - lead flux with Ag collector; nominal sample
weight 30g) and Au-ICP21 (gold by fire assay and
ICP-AES; 30g nominal sample weight).
2024 channel samples were submitted to ALS
Wangara, Perth for sample preparation (crushing and
pulverising) and analysed with combination of
methods FUS-PER02 (sodium peroxide fusion), MEICP89 (ICP-AES) and ME-MS91 (ICP-MS).
·
For geophysical tools, spectrometers,
handheld XRF instruments, etc, the
·
Not applicable, as only the accredited chemical
laboratory was used in determining the analysis.
parameters used in determining the analysis
including instrument make and model, reading
times, calibrations factors applied and their
derivation, etc.
·
Nature of quality control procedures
Quality control process consist of Company
adopted (eg standards, blanks, duplicates,
procedures, prescribed style of sampling and use of
external laboratory checks) and whether
control samples. Control samples were duplicates,
acceptable levels of accuracy (ie lack of bias)
standards and blanks. The control samples have
and precision have been established.
confirmed good quality of the results, aside from a
few failed field duplicates (which can happen in
nuggetty orogenic systems).
Verification of sampling
·
The verification of significant intersections
and assaying
by either independent or alternative company
· Not applicable, as no significant channel or drilling
intersections have been reported.
personnel.
·
The use of twinned holes.
Not applicable, as no new drilling information has
been reported.
·
Documentation of primary data, data
Analytical results have been received from the lab
entry procedures, data verification, data
and stored electronically, with no data manipulation.
storage (physical and electronic) protocols.
All data has been validated by the Company
personnel. The data is sent directly (without
ASX : KM1
Kali Metals Limited 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 12 of 16
manipulation) to database contractor. Database is
managed externally by RockSolid database
management services.
·
Discuss any adjustment to assay data.
No adjustment was needed. The results have been
reported without using cut-off grades.
Location of data points
·
Accuracy and quality of surveys used to
Soil and rock-chip samples: locations have been
locate drill holes (collar and down-hole
located by handheld GPS which is considered
surveys), trenches, mine workings and other
appropriate for reconnaissance and geological
locations used in Mineral Resource estimation.
mapping.
Channel sampling: start, end and inflection points in
trajectory were picked up by DGPS.
·
Specification of the grid system used.
Grid system used is GDA94/MGA50
·
Quality and adequacy of topographic
Handheld GPS error is ±5m for easting and northing,
control.
and ±10m for elevation. Stick DGPS horizontal
precision is ±0.25m and vertical ±0.5m
Data spacing and
·
Data spacing for reporting of Exploration
distribution
Results.
Rock-chip sampling locations were chosen ad-hoc
during reconnaissance. Sample spacing is hence
irregular.
Soil sample spacing: 100m along east west lines;
lines spaced 200m north-south.
Channels were cut at 50m spacing along strike of
pegmatite.
·
Whether the data spacing and distribution
Rock-chip and soil sampling type and style is not
is sufficient to establish the degree of
suitable to establish grade continuity suitable for
geological and grade continuity appropriate for
estimation studies.
the Mineral Resource and Ore Reserve
estimation procedure(s) and classifications
applied.
·
Whether sample compositing has been
Channel sampling carried out is suitable to establish
the average grade and spatial variability in the
northern part of Panther Prospect.
No sample compositing has been applied.
applied.
Orientation of data in
·
relation to geological
achieves unbiased sampling of possible
Whether the orientation of sampling
sampling orientation in relation to trend of
structure
structures and the extent to which this is
mineralisation.
known, considering the deposit type.
Rock-chip and channel sampling: Point sampling, no
Channel sampling: cut relatively orthogonally to strike
(its exposed part on surf
Share your feedback
Discover