Exciting New High-Grade Prospect Identified at Marble Bar
Released
Released
Announcement PDF
ASX Announcement (ASX:KM1)
22 July 2025
Exciting New High-Grade Prospect
Identified at Marble Bar
Highlights
•
An exciting new high-grade area has been identified at Mable Bar called the “Churchill Gold Prospect”,
strategically located between the already identified Tiger and Sherman Gold Prospects, it has rock-chip
results up to 28.4 g/t Au (Refer Figures 1 and 5).
•
Further rock chip samples at the Sherman Gold Prospect have also delivered impressive results, including
87.9 g/t Au (Refer Figure 4). Other new rock-chip results from the Project include:
8.2 g/t Au, 8.1 g/t Au, 7.0 g/t Au, 6.2 g/t Au, 5.9 g/t Au, 5.2 g/t Au and 5.0 g/t Au.
o
•
Cumulative length of the three gold-bearing zones has been extended to ~3km length1 (Refer Figures 3,
4 and 5).
•
With reconnaissance now complete and heritage clearance secured (Refer Figure 7), Kali is welladvanced in preparing the first-ever drilling program over its gold Prospects at its Marble Bar Project.
Standout results from the Project to date include 2:
•
Tiger Gold Prospect: ~1.8km strike length, 102 rock-chip samples to date, results up to 19.2
g/t gold, averaging 2.2 g/t Au (top-cut 10 g/t Au) (Refer Figure 3).
•
Sherman Gold Prospect (800m south-east of Churchill): ~700m strike length, 18 rock-chip
samples to date; results up to 87.9 g/t gold, average 2.7 g/t Au (top-cut 10 g/t Au) (Refer
Figure 4).
•
Churchill Gold Prospect (600m east of Tiger): ~600m strike length, 10 rock-chip samples
to date; results up to 28.4 g/t gold, averaging 1.6 g/t Au (top-cut 10 g/t Au) (Refer Figure 5).
Paul Adams, Managing Director of Kali Metals, commented:
“We are very pleased to announce the successful completion of the reconnaissance phase at our
Marble Bar Gold Project. The team have done a great job by identifying three prospects with multiple
high grade rock chips results over a large area with a combined length of approx., 3 kilometres of
surface outcrop. This is great achievement in such a small time and an exciting development that
significantly enhances the Project's drill-testing potential. The results returned reinforce our
confidence in the prospectivity of the area. Building on this momentum, we are now entering the next
phase of exploration which marks a major milestone for the Project, and we look forward to sharing
1The “strike length” refers to the straight-line distance between the furthest apart rock chips results containing gold mineralisation.
2
Note: While a significant number of rock-chip samples were taken along the alteration zone to date, readers should be cognisant that rock-chip
samples are "point" samples and results do not represent the average grades of the entire width of the alteration zone.
ASX : KM1
Kali Metals Limited 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 1 of 17
further updates as we progress toward drilling.”
Marble Bar Project
Kali Metals Limited (ASX: KM1) (“Kali” or “the Company”) is pleased to provide an update on exploration
activities at its Marble Bar Gold Project (“Project”) in Western Australia.
Kali’s Marble Bar Project is located in the eastern Pilbara region, approximately 10km east (20km by road) of
the town of Marble Bar and > 10km north of the Klondyke Gold Project. Covering 96km2, the Project geology
comprises the Mount Edgar Granitic Complex (over the eastern and central parts of Project area) and
Warrawoona Greenstone Belt (sedimentary and volcanic rocks) in the western part of the Project area (Refer
Figure 2).
Figure 1. Marble Bar Project: status of rock-chip sampling to date
ASX : KM1
Kali Metals Limited 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 2 of 17
Figure 2. Marble Bar Gold Project
Recent Activities
During June 2025, some 87 rock-chip samples from tenements were collected with the aim of extending the
length and width of mineralisation at the Tiger and Sherman Gold Prospects. In doing so, the Company
identified the Churchill Gold Prospect (Refer Figure 5). 138 rock-chip remaining sampling results were also
collected over the “Peggy” tenement (E45/6389) in late-May and early June 2025 (Refer Annexure C).
ASX : KM1
Kali Metals Limited 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 3 of 17
Figure 3. Tiger Gold Prospect: selected rock-chip samples over 3g/t gold (new results in red)
The recent results have increased the Tiger Gold Prospect to ~1.8km length (Refer Figure 3) and filled in gaps
in the previous strike of mineralisation. The Sherman Gold Prospect has been confirmed over ~700m length
and is still open to the north-west (Refer Figure 4) (toward the Churchill Gold Prospect). The Churchill Gold
Prospect (Refer Figure 5) has been identified and followed up along a 600m length; however, additional
mapping and rock-chip sampling at Churchill may confirm the continuity of mineralisation between the
outcrops visited so far. Two new alteration zones were also identified south-east of Sherman (at distances
0.6km and 3km from Sherman, with results up to 1.8 g/t Au and 1.7 g/t Au, respectively), both areas warranting
further exploration.
The mineralisation observed is currently interpreted as gently to moderately dipping to north-east.
Rock Characterisation
An initial rock characterisation study has been completed indicating that the highest average gold results return
from pyritic quartz (average 3.9g/t Au) and pyrite-poor quartz (average 2.4g/t Au) within the altered quartzmonzogranite (average 0.3g/t Au). The conclusions support the use of the geophysical Induced Polarisation (IP)
method to target the richer parts of the mineralised system.
The study indicates that quartz is a key host or carrier for gold in this system, but also that sulphide
mineralisation (pyrite) potentially enhances gold concentration (Refer Table 2 for sampling details).
ASX : KM1
Kali Metals Limited 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 4 of 17
Figure 4. Sherman Gold Prospect: selected rock-chip samples over 3g/t gold (new results in red)
Figure 5. Churchill Gold Prospect: selected rock-chip samples over 1g/t gold (new result in red)
ASX : KM1
Kali Metals Limited 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 5 of 17
Future Planned Activities
The exploration strategy over the next few months will see Kali focusing on (Refer Figure 6):
•
Drilling design at the identified gold prospects over tenements E45/4700 and E45/6389, and
submission of POW;
•
Access tracks and drilling pad preparation;
•
Initial drilling program over Marble Bar gold Prospects;
•
Drone survey over recently granted tenements E45/6429 and E45/6430; and
•
Initial reconnaissance and rock-chip sampling over recently granted tenements E45/6429 and
E45/6430.
Figure 6. Overview of planned activities in the next few months over Marble Bar Project
ASX : KM1
Kali Metals Limited 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 6 of 17
Previous Activities
Prior to Kali acquiring the Project tenements in January 2024 through its initial public offering (initially only
comprising tenements E45/4700 and E45/5970, with other tenements acquired subsequently 3), exploration
activities over the Marble Bar Project tenements were predominantly focused on lithium mineralisation.
Various explorers have carried out lithium-focused modern and systematic exploration over some of the
Project tenements in the past, but the Project has never been drilled for gold.
Previous activities over Marble Bar Project by Kali Metals is summarised in Table 1 below.
Table 1: Summary of previous exploration activities by Kali Metals
Date
Program
Results
ASX Announcement
September
Regional-scale
Hydrothermal alteration noted (prospect named “Tiger”)
15 October 2024
2024
reconnaissance
and 10 rock-chip samples collected over 400x400m area
(results up to 3.0 g/t Au). Quartz vein noted at locality
named “Sherman Prospect”, one rock-chip taken (1.7 g/t
Au).
November
Mapping at
Mineralisation at Sherman mapped over 120m length. 6
2024
Sherman
rock-chip samples taken, results up to 4.0 g/t Au.
11 December 2024
Prospect
December
Gold analysis on
619 samples historical soil samples (re)analysed. Results
2024
historical lithium
delineated cumulative 9km long gold-in-soil anomaly.
21 January 2025
soil samples
February
High-resolution
7.3km2 area covered with high-resolution drone imagery in
2025
drone imagery
support of upcoming detailed mapping campaign.
March-April
Mapping and
276 rock-chip samples collected over a soil anomaly area.
2025
rock-chip
Gold mineralisation at Tiger confirmed over 1.1km length,
sampling
results up to 19.1g/t Au. Mineralisation on surface at
28 May 2025
28 May 2025
Sherman increased to 300m length, results up to 6.6g/t Au.
May 2025
Acquisition
Strategic acquisition of E45/6389 – “Peggy” tenement
22 May 2025
May-June
Rock-chip
Initial 24 rock-chip samples from “Peggy” tenement,
25 June 2025
2025
sampling and
extending Tiger prospect to 1.7km length, rock-chip results
drone magnetic
up to 7.9g/t Au. High-resolution drone magnetic survey
survey
over ~4 km2 of the area covering both the Tiger and
Sherman Gold Prospects.
3
See ASX:KM1 Announcements dated 22/05/2025 and 18/03/2025
ASX : KM1
Kali Metals Limited 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 7 of 17
Authorised for release by the Board of Kali Metals Limited.
For further information please contact:
Paul Adams
Managing Director
E admin@kalimetals.com.au
Andrew Willis
Investor & Media Relations
E awillis@nwrcommunications.com.au
About Kali Metals Limited
Kali Metals’ (ASX: KM1) portfolio of assets cover 4,029km2 of exploration tenure prospective for gold, lithium
and critical minerals, located in WA (including the Pilbara and Eastern Yilgarn) and the Southern Lachlan Fold
Belt (in NSW and Victoria).
Kali Metals has a team of well credentialed professionals who are focused on exploring and developing
commercial resources and identifying new strategic assets to add to the portfolio. Kali Metals has a number
of prospective gold, lithium and tin Projects within its existing tenure and is committed to generate
shareholder value through exploration and development of these assets.
Forward Statements
This document may include forward-looking statements. Forward-looking statements include, but are not
limited to, statements concerning Kali’s planned exploration program and other statements that are not
historical facts. When used in this document, the words such as "could," "plan," "estimate," "expect," "intend,"
"may”, "potential", "should," and similar expressions are forward-looking statements. Although Kali believes
that its expectations reflected in these forward-looking statements are reasonable, such statements involve
risks and uncertainties, and no assurance can be given that actual results will be consistent with these forwardlooking statements.
Previously Reported Results / Competent Persons Statement
The information in this report that relates to Data and Exploration Results is based on and fairly represents
information and supporting documentation compiled and reviewed by Mr Mladen Stevanovic a Competent
Person who is a Member of the AusIMM (membership number 333579) and Exploration Manager at Kali
Metals. Mr Stevanovic has sufficient experience relevant to the style of mineralisation and type of deposit
under consideration and to the activity which he has undertaken to qualify as a Competent Person as defined
in the 2012 Edition of the ‘Australasian Code for the Reporting of Exploration Results, Mineral Resources and
Ore Reserves’. Mr Stevanovic consents to the inclusion in the report of the matters based on his information
in the form and context in which it appears.
The information in this announcement that relates to previously reported Exploration Results was previously
announced in Kali’s announcements dated 15 October 2024, 11 December 2024, 21 January 2025, 18 March
2025, 22 May 2025, 28 May 2025 and 25 June 2025. Kali confirms that it is not aware of any new information
or data that materially affects the information included in the original announcements.
ASX : KM1
Kali Metals Limited 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 8 of 17
Annexure A – Tenements
Marble Bar Project:
E45/4700
E45/5970
E45/6389
E45/6429
E45/6430
Annexure B – Heritage Survey Status
Figure 7. Marble Bar Project: heritage clearing status
ASX : KM1
Kali Metals Limited 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 9 of 17
Annexure C – Reported Results
Table 2: Reported Results (Coordinate system GDA94/MGA50)
ASX : KM1
Kali Metals Limited 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 10 of 17
Appendix 2: JORC Code, 2012 Edition – Table 1
Section 1: Sampling Techniques and Data (Criteria in this section apply to all succeeding sections.)
Criteria
JORC Code explanation
Commentary
Sampling techniques
·
Rock-chip sampling from quartz-rich outcrops in
Nature and quality of sampling (eg cut
channels, random chips, or specific
a wider sense (quartz veins, silica alteration,
specialised industry standard measurement
pegmatitic quartz etc). Sampled from in-situ
tools appropriate to the minerals under
outcropping rock material and subcrop (no rock
investigation, such as down hole gamma
floats sampled, extensive outcrop/subcrop is
sondes, or handheld XRF instruments, etc).
available in area of interest). Minerals of
These examples should not be taken as
economic interest are not visible. Petro-mineral
limiting the broad meaning of sampling.
identification made by field team through
observation.
The
rock
chip
samples
are
irregularly spaced throughout the area which is
considered
appropriate
for
reconnaissance
stage of exploration. The sampling practice is
appropriate
to
the
generally
extensive
outcropping / sub-cropping terrain and complies
with industry best practice.
·
Include reference to measures taken to
Rock-chip samples are “point” samples (unlike
ensure sample representativity and the
channel or drilling samples) and thus should not
appropriate calibration of any measurement
be considered representative of overall/average
tools or systems used.
grade.
·
Aspects of the determination of
Gold mineralisation at Project area is not visible.
mineralisation that are Material to the Public
Mineralisation is spatially associated to certain
Report.
alteration
mineral
assemblages
and
rock
textures: pyritic quartz veining in strongly altered
(potassic and propylitic) quartz-monzonite.
·
In cases where ‘industry standard’ work
Approximately 1.5-2kg of sampled material per
has been done this would be relatively simple
sample from outcrop and subcrop taken with a
(eg ‘reverse circulation drilling was used to
geopick or a club hammer. Sample material is
obtain 1 m samples from which 3 kg was
collected in dry conditions and placed in calico
pulverised to produce a 30 g charge for fire
bags. Samples were submitted (without sub-
assay’). In other cases more explanation may
sampling) to ALS Perth for sample preparation
be required, such as where there is coarse
(to produce 50g charge) and analysed. Sample
gold that has inherent sampling problems.
preparation at the lab included sample weighing,
Unusual commodities or mineralisation types
drying, crushing and pulverising.
(eg submarine nodules) may warrant
disclosure of detailed information.
Drilling techniques
·
Drill type (eg core, reverse circulation,
open-hole hammer, rotary air blast, auger,
Not drilled. Utilised geopick and a small mallet to
break the surface rocks.
Bangka, sonic, etc) and details (eg core
diameter, triple or standard tube, depth of
diamond tails, face-sampling bit or other type,
whether core is oriented and if so, by what
method, etc).
Drill sample recovery
·
Method of recording and assessing core
and chip sample recoveries and results
ASX : KM1
Not drilled. But made effort to capture all rock
fractions after chipping the rock.
Kali Metals Limited 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 11 of 17
assessed.
·
Measures taken to maximise sample
recovery and ensure representative nature of
Not
drilled.
Rock-chip
samples
are
not
representative, being “point” samples.
the samples.
·
Whether a relationship exists between
sample recovery and grade and whether
Not drilled. No such relationship or bias is
expected.
sample bias may have occurred due to
preferential loss/gain of fine/coarse material.
·
Logging
Whether core and chip samples have
Geological logging was completed by qualified
been geologically and geotechnically logged to
geologist. Information collected for each sample
a level of detail to support appropriate Mineral
would include type of lithology, alteration,
Resource estimation, mining studies and
mineralisation and the structural measurements.
metallurgical studies.
Point rock-chip samples cannot be used to
support Mineral Resource estimate.
·
Whether logging is qualitative or
Qualitative logging has been completed in the
quantitative in nature. Core (or costean,
field. After logging (as briefly described above),
channel, etc) photography.
sampled material was placed onto labelled
calico bag, photographed and placed into the
bag. Sampling information was transferred from
portable device (phone, tablet and handheld
GPS) to Excel spreadsheet at the end of each
day and locations validated in GIS. Photos of
samples and photos of notes and sketches from
notebooks
were
copied
over
onto
the
Company’s server.
·
The total length and percentage of the
All samples were geologically logged.
relevant intersections logged.
Sub-sampling
·
techniques and sample
quarter, half or all core taken.
If core, whether cut or sawn and whether
preparation
Not applicable. Rock-chip samples are bulk
samples of rock material from a certain microlocality.
·
If non-core, whether riffled, tube sampled,
rotary split, etc and whether sampled wet or
Sample material was not split or sieved in the
field.
dry.
·
For all sample types, the nature, quality
The sample preparation at the lab included: dry,
and appropriateness of the sample preparation
crush entire sample & fine crush 70% to -2mm,
technique.
pulverise 85% to -75um.
·
No sub-sampling or preparation in the field
Quality control procedures adopted for all
sub-sampling stages to maximise
before sampling.
representivity of samples.
·
Measures taken to ensure that the
Analysis has included company inserted field
sampling is representative of the in situ
duplicate, standard and blank samples – as well
material collected, including for instance
as lab standard and duplicate analysis (~5%
results for field duplicate/second-half
total inserted control samples, which can be
sampling.
considered sufficient for surface samples). All
control samples were in acceptable ranges (<1
STD). Duplicates to date have shown minimal
ASX : KM1
variability, even at high grades (19.0 vs 19.4 g/t
Kali Metals Limited 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 12 of 17
Au, 88.7 vs 88.0 g/t Au etc). While the rock-chip
sampling results can indicate the variability, only
channel and drilling samples can be reliably
used to assess the spatial variability of
mineralisation.
·
Whether sample sizes are appropriate to
Rock chip samples contain 1.5-2kg of chipped
the grain size of the material being sampled.
in-situ outcrop and subcrop rock material, with
individual chips sizes usually varying from 1cm
to 10cm.
Quality of assay data
·
and laboratory tests
of the assaying and laboratory procedures
The nature, quality and appropriateness
The rock-chip samples were submitted to ALS
Perth
used and whether the technique is considered
accredited laboratory). Samples were analysed
partial or total.
with method Au-ICP22 (50g charge). Au-ICP22
(independent
and
internationally
is a code for fire assay analysis of gold with an
ICP-AES finish, generally considered a total
analysis method. It involves a total 4-acid digest
to dissolve all elements, including gold, in the
sample, followed by ICP-AES analysis to
determine the gold content. Sampling and
assaying quality control procedures consisted of
the laboratory inclusion of Certified Reference
Materials (CRMs), coarse blanks and sample
duplicates. The analytical techniques and quality
control
protocols
used
are
considered
appropriate for the data to be used for reporting
exploration
rock-chip
results.
Once
the
exploration activities transition from renaissance
phase to the phase of channel sampling and
drilling, some ~10% control samples will be
included in the sampling sequence before
sample submission to laboratory.
·
For geophysical tools, spectrometers,
handheld XRF instruments, etc, the
No geophysical surveys or pXRF analysis are
being reported herein.
parameters used in determining the analysis
including instrument make and model, reading
times, calibrations factors applied and their
derivation, etc.
·
Nature of quality control procedures
QAQC process consist of Company procedures,
adopted (eg standards, blanks, duplicates,
prescribed style of sampling and use of control
external laboratory checks) and whether
samples, as well as the check of control sample
acceptable levels of accuracy (ie lack of bias)
performance and reporting. Control samples
and precision have been established.
were duplicates, standards and blanks – as
described elsewhere in JORC Table 1. The
control samples have confirmed the quality of the
results.
Verification of sampling
·
and assaying
intersections by either independent or
The verification of significant
Not applicable, as no significant channel or
drilling intersections are being reported.
alternative company personnel.
·
ASX : KM1
The use of twinned holes.
Not applicable, as no drilling is being reported.
Kali Metals Limited 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 13 of 17
·
Documentation of primary data, data
Analytical results have been received from the
entry procedures, data verification, data
lab and stored electronically, with no data
storage (physical and electronic) protocols.
manipulation. All data has been validated by the
Company personnel. The data is sent directly
(without manipulation) to database contractor.
Database is managed externally by Rock Solid
Data
Consultancy
database
management
services. Quality control report is produced by
RockSolid Data Consultancy and checked by
Kali staff.
·
Discuss any adjustment to assay data.
The results have been reported without using
lower cut-off grades. The average grades are
reported using 10g/t gold top-cut.
Location of data points
·
Accuracy and quality of surveys used to
Rock-chip samples have been located by
locate drill holes (collar and down-hole
handheld GPS which is considered appropriate
surveys), trenches, mine workings and other
for reconnaissance and geological mapping.
locations used in Mineral Resource estimation.
·
Specification of the grid system used.
Grid system used is GDA94/MGA50.
·
Quality and adequacy of topographic
Handheld GPS error is ±5m for easting and
control.
northing, and ±10m for elevation.
Data spacing and
·
Rock-chip sampling locations were chosen ad-
distribution
Results.
Data spacing for reporting of Exploration
hoc during reconnaissance. Hence, sample
spacing is irregular. However, on average, the
alteration zone was sampled at every ~10-50m
spacing along the strike of altered outcrop.
·
Whether the data spacing and distribution
Rock-chip and soil sampling type and style is not
is sufficient to establish the degree of
appropriate type of sampling to establish grade
geological and grade continuity appropriate for
continuity suitable for
the Mineral Resource and Ore Reserve
studies.
resource estimation
estimation procedure(s) and classifications
applied.
·
Whether sample compositing has been
No sample compositing has been applied.
applied.
Orientation of data in
·
Whether the orientation of sampling
Rock-chip
point
sampling
was
“randomly”
relation to geological
achieves unbiased sampling of possible
located along the strike of alteration zone at
structure
structures and the extent to which this is
every ~10-50m distance.
known, considering the deposit type.
·
If the relationship between the drilling
No known bias has been introduced.
orientation and the orientation of key
mineralised structures is considered to have
introduced a sampling bias, this should be
assessed and reported if material.
Sample security
·
The measures taken to ensure sample
security.
Samples were always in the custody and control
of the Company representatives until delivery to
the laboratory.
Audits or reviews
·
The results of any audits or reviews of
sampling techniques and data.
ASX : KM1
No external audit of geochemical results has
been undertaken at this stage.
Kali Metals Limited 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 14 of 17
Section 2: Reporting of Exploration Results (Criteria listed in the preceding section also apply to this section.)
Criteria
JORC Code explanation
Commentary
Mineral tenement and
·
Please refer to Annexure A “Tenements” for
land tenure status
and ownership including agreements or
information on tenement portfolio. There are
material issues with third parties such as joint
currently no undisclosed agreements or material
ventures, partnerships, overriding royalties,
issues with third parties. All Marble Bar Project
native title interests, historical sites, wilderness
tenements are in good standing and are 100%
or national park and environmental settings.
owned by the Company. Please refer to
Type, reference name/number, location
Prospectus (announced on 04/01/2024) and the
announcement about renegotiated Farm-In
agreement with SQM (dated 7 October 2024).
·
The security of the tenure held at the time
There are no known impediments to operate on
of reporting along with any known
the tenement holding. Several heritage surveys
impediments to obtaining a licence to operate
have been carried out to date and cleared the
in the area.
priority areas for exploration (see Figure 6 within
this report for the latest status of heritage
clearing).
Exploration done by
·
other parties
exploration by other parties.
Acknowledgment and appraisal of
The wider Project area has been a subject to a
limited historical exploration, mostly targeting
alluvial tin (from 1896) and LCT pegmatites in
recent years. Some of the current Kali’s
prospects have been indicated on geological
maps and initially surface-sampled by previous
explorers (for details see ASX announcement
“Prospectus” dated 04/01/2024), together with
government data provided by GSWA past
information. This information has allowed
recognition of the Project’s potential and
assisted with selection of areas for Kali’s current
reconnaissance-type
work.
The
gold
mineralisation has not been historically mined at
the Project area, neither was targeted with
historical drilling.
Geology
·
Deposit type, geological setting and style
of mineralisation.
Area is predominantly underlain by Archean
granitic
and
gneissic
(monzogranitic,
granodioritic, tonalitic and similar) batholiths.
The gold mineralisation occurs in Jenkin
Granodiorite and Fig Tree Gneiss. Gold is
spatially associated to quartz veining associated
to
pervasive
strong
potassic
and
silica
alteration, moderate propylitic alteration and
weakly disseminated pyrite and pyrrhotite, in
felsic intrusive.
Drill hole Information
·
A summary of all information material to
the understanding of the exploration results
Not applicable for this entire criterion, as no
drilling information is being reported.
including a tabulation of the following
information for all Material drill holes:
o easting and northing of the drill hole collar
ASX : KM1
Not applicable.
Kali Metals Limited 34 Colin St, West Perth WA 6005 Australia ABN: 85 653 279 371
P 08 6424 8880 E admin@kalimetals.com.au W www.kalimetals.com.au
Page 15 of 17
o elevation or RL (Reduced Level – elevation
Not applicable.
above sea level in metres) of the drill hole
collar
o dip and azimuth of the hole
Not applicable.
o down hole length and interception depth
Not applicable.
o hole length.
Not applicable.
·
Not applicable, as no drilling information is being
If the exclusion of this information is
justified on the basis that the information is not
reported.
Material and this exclusion does not detract
from the understanding of the report, the
Competent Person should clearly explain why
this is the case.
Data aggregation
·
In reporting Exploration Results,
Average gold grade reported is derived from all
methods
Share your feedback
Discover